Showing posts with label planking. Show all posts
Showing posts with label planking. Show all posts

Saturday, April 11, 2009

A Whole Boat!

At lot has been done since our last post. The boat is now fully planked. And just today Drew finished attaching the outer stem, so the hull of our boat is now complete! This is excellent progress. It looks like we will in fact have the boat ready to be able to move by May.

Before the boat will be ready we are going to put some fiberglass sheathing on the bottom of the boat to guard against abrasion during our beach landings. The fiberglass will just cover the bottom, ie the oval shaped plywood piece that is more or less parallel to the water. There will be a little overlap, and the cloth should come up an inch or two all the way around. This will help protect the base of the stem and the garboard seam, and hopefully prevent the glass from peeling off to easily.

In this picture, the starboard sheer strake (the plank closest to the basement floor) is not actually glued on. Since this shot was taken, Drew and I glued this plank on, and Drew spiled and cut out a matching plank for the port side. Brant (whose name i'm not 100% sure on how to spell) came down to help drew glue that one on. In drew's opinion, the boat looks pretty darn good. I'm excited to see it.

In D.M.'s post of March 25th, he voiced the larger goal of having the boat movable by May. It now looks like that will be totally feasable. In order to be ready to turn the boat over, which will essentially make it available to move, we just need to glass and paint the bottom. Of course, after that there will plenty of work to do before the boat is actually "done." (seats, decks, oars, oarlocks/tholepins, a name, etc).

Look for more action here in the next few days. I'll be up in Olympia for the coming weekend, and we should have access to a camera, fingers crossed.

Wednesday, March 25, 2009

JD, Dory, and Me Makes Three (No Camera)

Due to a severe lack of camera, I haven't taken any pictures in the boatshop in quite some time. This is part of the reason why there have been so few posts (none) since October. The other reason is that I haven't been in the boatshop very much at all. I have however been there a little. And JD has been here since my last post, and he is in fact here, in Olympia today. Which is why I'll be at the boatshop, and also why I'm posting now. Some explanation must be made, pictures or no, of the progress that has occurred and what we intend to happen from here on out. Here we go.

Since the last picture that showed the boat, I've added the next row of planks. This involved cutting a bevel into the top edge of the garboards so that the next plank would lay neatly, and with a good flat gluing surface. Once the mating surface was prepared I made a spiling pattern out of doorskin, and scarphed the planking stock for the topsides strake. Then I had to figure out how to handle the long planks , get the surfaces glued and attach them while keeping it positioned just so. I succeeded fairly well I think, but there's definitely some fixing to be done as we move on to the sheer strake.

Yesterday JD and I devised a system for pulling the lumps out of the topside plank so we can accurately cut the new bevel and fair for the sheer plank. I think we can cut the bevel today. Then we can make the pattern for the next strake. I'm thinking that it would be good to use 1/4 in. plywood for the pattern making, because it will bend more like the actual plank and won't deflect when I'm laying out the pattern to mark the spiles onto the planking stock. This probably doesn't make any sense, but it will when you see the boat. In your gut you'll know that I was spiling, avoiding deflection, cutting bevels, correcting errors, etc. and that it all adds up to a beautiful hull, right?

The big goal is to have the boat moveable by May. I'm going to be really busy, but it's a totally achievable goal. And it will put us well on track to rowing on the Sound this summer. Yesss!

Monday, September 22, 2008

The New Table, The New Garboard, The News on Scarphing

I built this huge table for laying out the planking and gluing it.  It's made of a 4' x 10' sheet of 1" MDO.  It's plywood that has a leveled surface that's covered with paper.  It's easy to draw on, and really smooth and flat.  I was hoping it would be a little stiffer, but it's good enough for a gluing surface.  The half sheets are light enough to move around easily by myself, so I unscrew them from the horses and double them to make a stiff enough surface for scarphing.




I glued the port garboard scarphs today.  I'm definitely getting better at it.  I think that these ones are going to turn out pretty well.  Better than the last seven anyway.  Maybe by the time we get to the sheer strake I'll be expert at this plywood scarphing thing.

The most important things I've learned are things that I "knew" already.  The subsurface (the bench or whatever the scarphed objects are sitting on) really has to be perfectly flat, at least the part directly under the scarphing zone and a bit past.  Otherwise the plane will bridge over the low spots or take too much off the high spots.  The clamping strip that's nailed or screwed through the scarph should really be exactly the width of the scarph.  It's also nice to wrap the strip in plastic and staple it on so there's no plastic flapping around, allowing a clear view of the joint once it's clamped.      

Sunday, September 21, 2008

A Visit From Andy

Our old friend Tetris Wassertron visited the boat shop today.  Helped clean up a little, and kept me company while I slowly moved ahead with the port garboard.


Thursday, September 18, 2008

Port.

Last week I patterned and constructed the starboard garboard.  So far this week I've fixed my mistake at the stern, and begun preparations for the port garboard.

I'm not sure exactly how it happened, but the plank that I made for the starboard side ended up a little short from top to bottom in the stern.  Yesterday evening I added a piece to that section, which I faired in today.  So the starboard side fits now.  When the boat is all planked and we turn her over, I think we'll probably want to add a stringer along that seam from the transom to frame number six to shore up the small joint and ensure structural integrity.

As I suspected, the plank that now fits on the starboard side doesn't exactly fit on the port side, meaning the boat isn't exactly symetrical.  Hopefully this minor asymetry won't affect the tracking and handling of the vessel too much when she's in the water.  I think the effects will probably be neglegable as the disparity is within an eighth from one side to the other.

Saturday, September 13, 2008

Garboard Ho!

So, does that look like a boat or what?  It looks like a boat.  Maybe we'll just have a garboard canoe.  Keep it low profile.

Or maybe we'll make a whole boat and row to Alaska.  I'll have to talk to JD about it.  Canoe?


I cut out the garboard and test fit it today.  It mostly fit.  The part that doesn't, well, I'm going to have to fix it.  

Tuesday, September 9, 2008

Patterns and Spiling

I've finally finished all the fairing.  The new battens (thank you John Gardner and Howard Chapelle for the dimensions) made what was once almost impossible into a relatively easy task.  I still spent several days working my way along each frame, making the bevel just right to accept the planking.  


Yesterday, I ended the day making the pattern for the garboard plank.  This is really exciting because it means we've made it to the next major part of the project (and the part that makes the boat a boat).  We're now separating the inside of the boat from the outside, making it a floatable object.  



Today I finished making the garboard pattern, and spiled the shape of the plank-to-be onto it.  Spiling is the process of transfering a three dimensional shape onto a flat piece of something (probably wood) that's held against the object.  In this case the object is the hull of the boat, the transfer tool is a compass, and the flat spiling stock is 1/8 inch plywood bent around the frames of the boat.  (The pictures will make it a little clearer.)  


After finishing the pattern and spiling, my problem this morning went something like this:  I have one eight by four foot piece of plywood to make the garboard plank with.  The plank is about 17 feet long by twenty or so inches wide with a big curve.  How did I get 17 feet out of 16 feet?  Very carefully.  Look at the pictures to discover my fancy style.